22/001 - The Provision of Maintenance Services for the Siemens SGT-200 Gas Turbines to GNI(UK)

Description

22/001 - The Provision of Maintenance Services for the Siemens SGT-200 Gas Turbines to GNI(UK) - please refer to the PQQ document for further information Lot 1: The scope of this requirement is for the provision of preventative and corrective maintenance services and materials, including overhaul services, for three (3) Siemens SGT-200 Gas Turbines or equivalent and ancillary equipment, located at GNI(UK) Compressor Station at Brighouse Bay (Kirkcudbright), in southwest Scotland. The scope of the equipment which include but not limited to for this requirement is as follows; • The gas turbine engine (including the gas generator/producer and power turbine). • The turbine control system (including the Fire and Gas system(s)). • The turbine ancillaries (including motors, instrumentation, lube oil system, and fuel gas systems). • The scope of the maintenance services which include but not limited to for this requirement is as follows; • Preventative/Scheduled Maintenance Services (including management service) - inspections, inspection kits, provision of service personnel and repairs. • Minor (24,000 hours) overhaul. • Corrective Maintenance Services - provision of service personnel and repairs. • Spares/parts. In addition to the services outlined above, GNI(UK), may include a provision in the requirement for a major (48,000 hours) overhaul (turbine service exchange), for at least one (1) turbine. Additional information: You must submit through the eTenders system before the deadline. The system will automatically lockdown at the exact time specified in the PQQ documents. Tenders that are not fully uploaded by the response deadline will not be accepted by the system. Please submit via the eTenders system not later than 12.00 hrs local time on Wednesday 20th April 2022. www.etenders.gov.ie/system-user-guides Lot 1: The scope of this requirement is for the provision of preventative and corrective maintenance services and materials, including overhaul services, for three (3) Siemens SGT-200 Gas Turbines or equivalent and ancillary equipment, located at GNI(UK) Compressor Station at Brighouse Bay (Kirkcudbright), in southwest Scotland. The scope of the equipment which include but not limited to for this requirement is as follows; • The gas turbine engine (including the gas generator/producer and power turbine). • The turbine control system (including the Fire and Gas system(s)). • The turbine ancillaries (including motors, instrumentation, lube oil system, and fuel gas systems). • The scope of the maintenance services which include but not limited to for this requirement is as follows; • Preventative/Scheduled Maintenance Services (including management service) - inspections, inspection kits, provision of service personnel and repairs. • Minor (24,000 hours) overhaul. • Corrective Maintenance Services - provision of service personnel and repairs. • Spares/parts. In addition to the services outlined above, GNI(UK), may include a provision in the requirement for a major (48,000 hours) overhaul (turbine service exchange), for at least one (1) turbine. Additional information: You must submit through the eTenders system before the deadline. The system will automatically lockdown at the exact time specified in the PQQ documents. Tenders that are not fully uploaded by the response deadline will not be accepted by the system. Please submit via the eTenders system not later than 12.00 hrs local time on Wednesday 20th April 2022. www.etenders.gov.ie/system-user-guides