Supply and Install of Hoarding Signage at the Opera Project

Description

The services to be provided by the Hoarding Signage contractor are set out below but are not limited to: 1. Review of as-built provided survey data for Hoarding and undertake survey check if required to inform design. 2. Manufacture of Hoarding Signage as per design to be provided by Limerick Twenty Thirty DAC (LTT). 3. Installation of Hoarding Signage on to existing plywood hoarding. Temporary Works design drawing for hoarding can be found in Appendix C. 4. The hoarding signage material will consist of Hoarding grade Dibond with digitally printed vinyl graphics applied. The hoarding signage must cover the 100mm pelmet at the top of the hoarding. This may be covered using a PVC strip or similar where the Hoarding signage contractor advises. This hoarding material must be capable of withstanding 3 years of weathering. 5. Phase 2: The contractor may specify lower grade Dibond material for Phase 2 with duration of hoarding material for presence of 12 months only. 6. The material must consist of anti-graffiti laminates applied over the vinyl.