RQ0000028716 3 Mass Spectrometers DSTL

Description

SUBJECT TO FUNDING Mass Spectrometer Essential requirements: • 1-200 AMU range • Instrument PC controlled via rs232/Ethernet/USB or other physical cable connection (i.e. not wifi) • Triple filtered single quadrupole • Sub ppm resolution across all analytes of interest - to be supplied with ITT • Corrosion resistant internals - HCl is the particular corrosion problem but SO2, Cl2 and Phosgene are also problems for stainless steel. Hastelloy or similar alloy materials will be needed for exposed components. • Multi stream valve inlet to allow 3 or more inlets • Fast response, heated quartz inert capillary sample inlet - sufficient to display 'real time' detection • Heated transfer line(s) - up to 200 degrees to avoid condensation of vapours. For DMMP, we need to avoid condensation and run "cleaning/flushing" to clear contamination of the sample line. • PC software that can automatically output quantifiable results • PC software that can allow full calibration and easy data interpretation - generation of standard curves from calibrated gas samples e.g. Ethylene Oxide from which quantification of unknown samples can be made. • License for software to be installed on at least 3 different PCs (to cover the 3 Mass specs) • UK based, In-house engineering support with next day call out • Mass spectral database software to automatically identify unknown chemicals • In-house customisation options to fit our needs - what capability has the supplier got to provide and support modified off the shelf items e.g. corrosion-resistant sample accessories? • Not exceed 80x80x80cm in size • Manufacturer suppled onsite training on delivery and set up of equipment at Dstl Porton Down Desirable requirements • 1-300 AMU range • Detection of low ppm to high percentage concentrations of analytes in < 100 ms • ≤5 ppb resolution for most analytes of interest • Automated spectral analysis to give peak identification and composition analysis • Manufacturer to provide on-site training package for a minimum of two Dstl staff upon installation of equipment • Networkable comms to allow monitoring outside of lab (possibility to run equipment on virtual machines over network) • Communications protocols which allow integration with other automated equipment in lab via Azeotech DAQ Factory • Multi year support contract (>3 <5 years as part of the quote) • Custom built trolley to allow MS to be sited under fume cupboards • License for software to be installed on at least 6 different PCs (to cover the 3 Mass specs and 3 virtual networked machines)