Tower Road Junction Signalisation

Description

The scheme consists of the reconfiguration and signalisation of the existing B9006/C1036 Junction. The scheme consists of the reconfiguration and signalisation of the existing B9006/C1036 Junction, in particular - The taking up/down of approx. 500m of kerbing, existing signage, street lighting a traffic count camera and general site clearance. - Excavation and disposal of existing footway, verge and a large splitter island. - Installation of 2 new drainage gullies with associated connection. - Installation of approx. 500m of new kerbing - Laying of approx. 600m2 of new footway - Laying approximately 600m2 of new carriageways of varying depths. - Installation of roadmarkings - Installation of new signage - Installation of new street lighting (columns, luminaires and connections to be provided by The Highland Council. - Installation of approximately 130m of ducting in both footway and carriageway for streetlighting - Installation of approximately 140m of ducting in footway and carriageway for traffic signals - Installation of traffic signal duct boxes and pole footings (to be supplied by the Highland Council) - Installation of traffic signal poles, heads, and controller (to be supplied by the Highland Council) - Co-ordination and attendance while Openreach carry out inspection chamber reconstruction and associated ducting. - Co-ordination and attendance while SSE carry out diversions of 11Kv cables - Co-ordination attendance while Vodafone adjust one inspection chamber. - Co-ordination attendance while City fibre adjust one inspection chamber. A limited duration four week road closure of the C1036, between the junction with the B9006 and U1124 will available to the contractor. (E 271040,N 844349 to E 271193, N 844601) Traffic flow on the B9006 shall be maintained at all times, although temporary traffic signal control is permitted but must be manually controlled during peak hours