Weatherproof clothing

Description

Procurement of n. 1 800 winter operational uniforms. The operational uniform consists of a jacket and trousers. The measurements shown in the following description refer to size 52 / R. II.1. Jacket It's composed by: — body, — sleeves, — lapel, — detachable thermal interior, — patches. II.1.1. Body It consists of two front quarters in two pieces and a hind quarter in one piece. The assembly of the aforementioned parts is made with two-needle overlock machine stitching. Behind there is a yoke consisting of a single stretch of fabric that affects both the front and the back, repeated at the bases with a double topstitch. Inside it has two placket that go from the neck to the bottom, approx. mm. 35, to which the inner bodice is anchored. At the front, there are two vertical double-threaded pockets of mm. 180, closed with a zip and with stop beams at the end. The pocket bag is anchored to the side seam of the side by means of a mm high grosgrain tape. 10 fixed to the lower end of the same. The upper ends of the zippers are protected by a double fabric layer inserted in the respective assembly seams. The front opening is secured by a zip in suitable plastic material to a slider of suitable length and covered by a flap made of the same main fabric. The patella, approx. cm. 8, is applied to the left half-front with riveted seam and totally covers the two half-front pieces from the bottom to the top of the collar. The flap is closed on the right half-front by means of 6 press-studs positioned at about 2 cm. from the end of the flap itself, of which the first and last are positioned respectively at about 2 cm. from the base of the neck and collar while the others are symmetrically spaced. The assembly seam of the sides is double-stitched.