Provision of replacement Crane Gantry Cabs

Description

The contract value published in the original UK6 Contract Award Notice was incorrect due to an administrative error. The correct contract value is £290,000 excluding VAT 2. The Service 2.1 The Contractor shall provide the following service to the Client for the duration of the service period: 2.2 Design of x3 replacement gantry crane operator cabs 2.3 Fabrication of x3 cabs once design approved 2.4 Replacement/installation of x3 cabs once fabricated 2.5 Commissioning of x3 cabs once installed. Cab Specification:- Construction of 3 mm steel plate. Internally reinforced with steel profiles and lined with 0.7 mm galvanized, plastisol-coated steel plate on walls and ceiling. 250 mm raised floor for cable routing. Steel plate floor covered with profiled rubber mat. Walls and ceiling insulated with 45 mm mineral wool. All windows made of 6 mm green tint toughened safety glass. Floor window without tint Incl. document holder and coat hook Surface treatment - C3H 180 μm: Entrance door with full window made of 6mm toughened safety glass, green tint Additional glass in side and rear made of 6mm toughened glass, green-tinted Terminal cabinet including door and mounting plate, L x W x H = 400x185x1800mm Light fixture LED 16.8W, 230V, 50/60Hz Light and socket Air-con split system 230V, 50/60Hz Cooling capacity 3,5 kW / 11942 BTU/h Heating capacity 4,0 kW / 13648 BTU/h Operating temperature -20°C til +46°C Filter box consisting of HEPA dust filter, carbon filter, 2Kw heater and fan blower and 4 meter air hose Operator seat SCS BL Fabric, complete Mechanical Suspension Joystick consoles 150x450mm Padded arm rests Vinyl head rest Turntable, with lock 2 pcs joystick's 4 steps in 4 directions Push button grab operation Push button for start and 1 pc. emergency stop All mechanical mounted only