Supply of Portable Visual Inspection Devices inclusive of maintenance where applicable.
Published
Value
Description
Border Force (BF) secures the border and promotes national prosperity by facilitating the legitimate movement of individuals and goods, whilst preventing those that would cause harm from entering the UK. BF Officers do this by inspecting goods in a range of environments that include but not limited to; freight consignments (ship and aircraft searches), roll-on, roll-off trailers, over high vehicles, and cars. Border Force is looking to procure a commercial, off-the-shelf (COTS) contract for an existing handheld technology that is able to facilitate in the detection of illegal goods entering the UK in freight, vehicles, aircraft and other modes of transport, for general use and more specifically in volatile environments such as fuel tanks (Hazardous Zone Capability). Lot 1: Portable Visual Inspection Devices - General Use Capability In order to aid Border Force in finding concealed goods the technology required must: • Be able to transmit an image to a lightweight handheld device from small, dark and potentially inaccessible areas within freight/roll-on roll-off traffic and aircraft and/or any other vehicle. • The insertion/distal tip needs to be small enough to fit into a gap of a maximum of 10mm in diameter. • The flexible tube that houses the camera needs to be a minimum of 0.9m, up to a maximum of 3m. • The camera at the end of the flexible tube should be able to offer a clear live image of a range up to 1m in low to no light areas, with a static field of vision of at least 90 degrees. • Be durable enough to work in temperatures ranging from -10 to 40 degrees. • Be robust enough to withstand 2m drops and still be fully operational. - Please provide evidence / details of any certification • Needs to be dust tight and waterproof - Please provide evidence / details of any certification • The method of image generation must be passive (the device does not emit energy to capture an image, other than a light source to illuminate dark spaces). Active methods, such as radioactive sources are not in scope. • Be robust, portable, and light enough to be used and operated by a single person. • Sufficient battery life to enable the camera to be used continuously for 5hrs or have a swappable battery pack. Border Force would also be interested in the below Capability: • Interchangeable scopes ranging in length between 1- 3m Please provide an estimate of the Capability’s useful life expectancy, including any and all maintenance services required for the Capability to ensure devices are safely maintained. Lot 2: Portable Visual Inspection Devices - Specialist Container Search In order to aid Border Force in finding concealed goods the technology required must: • Be able to transmit an image from within containerised freight to a lightweight handheld device. -The insertion/distal tip needs to be small enough to fit into a gap measuring a maximum of 9.5mm in diameter. • The Capability should come with an application sleeve to be inserted into the 9.5mm gap before the Capability to protect the inspection camera from damage on entry and exit. • Be able to offer a clear colour live image from 2 – 13m in low to no light areas; this must include a light source. - It must also include the ability to take photos that can then be transferred via SD card • The protective insertion sleeve that houses the camera needs to be a minimum of 30cm. • Ability to give a 360-degree view of the inside of a container, this could be through: - Ability to manoeuvre the camera head 90 degrees up, down, left and right. - Alternatively, contain a dual camera on the end of the scope with the Capability to switch between the two to offer a 360-degree view. • Be durable enough to work in temperatures ranging from -10 to 40 degrees. • Be robust enough to withstand 2m drops and still be fully operational. - Please provide evidence / details of any certification • Needs to be dust tight and waterproof/submerged in water. - Please provide evidence / details of any certification • The method of image generation must be passive (the device does not emit energy to capture an image, other than a light source to illuminate dark spaces). Active methods, such as radioactive sources are not in scope. • Be robust, portable, and light enough to be used and operated by a single person. • Sufficient battery life to enable the camera to be used continuously for 5hrs or have a swappable battery pack. Providing all the points above are satisfied, with the exception of it being operational by a single person, Border Force are also interested in the possibility to: • Have the functionality to have a wireless system whereby the camera sends the live video to a handheld device for viewing. - The wireless functionality will need to be operational from a minimum of 5m away. Please provide an estimate of the Capability’s useful life expectancy, including any and all maintenance services required or the Capability to ensure devices are safely maintained. Lot 3: Portable Visual Inspection Devices - Hazardous Zone Capability In order to aid Border Force in finding concealed goods the technology required must: • Be able to transmit an image to a lightweight handheld device from small, dark and potentially inaccessible and hazardous areas within freight/roll-on roll-off traffic and aircraft and/or any other vehicle. • Be able to be fully operational from inside potentially explosive environments including inside full fuel tanks without the risk of generating a spark which might trigger an explosion. - Please note what environments and fuel is not included or not possible. • The supplier should ensure that the device is suitably rated for use in a potentially explosive atmosphere. At a minimum this should include any parts of the equipment which will enter the space. • The Capability should not have an electrical current running through any component that will enter the hazardous environment. - The insertion/distal tip needs to be able to operate at a distance of at least 3 m from the opening being inspected. • Needs to be small enough to fit into a gap of up to 10mm in diameter. - The Capability should come with an application sleeve (no wider than 12mm diameter) to be inserted into the gap before the Capability to protect the inspection camera from damage on entry and exit. • Ability to manoeuvre the camera head without the use of an electrical current. • The flexible tube that houses the camera needs to penetrate the hazardous zone up to 1.5m. • Be able to offer a clear live image through hazardous liquids, such as petrol, from up to 1m away in low to no light areas, with a minimum field of vision of 90 degrees. • Be durable enough to work in temperatures ranging from -10 to 40 degrees. • Be robust enough to withstand 2m drops and still be fully operational. - Please provide evidence / details of any certification • Needs to be dust tight and waterproof/submerged. - Please provide evidence / details of any certification • The method of image generation must be passive (the device does not emit energy to capture an image, other than a light source to illuminate dark spaces). Active methods, such as radioactive sources are not in scope. • Be robust, portable and light enough to be used and operated by a single person. • Sufficient battery life to enable the camera to be used continuously for 5hrs or have a swappable battery pack. Border Force would also be interested in ATEX (or equivalent) rated electrical equipment that can achieve all of the above excluding non-electrical elements. -This can be achieved by the use of non-electrical equipment or suitably ATEX rated equipment. For ATEX rated equipment entering the fuel tank, it should be Cat 1 (Suitable for use on a Zone 0), Gas Group IIC. For non-electrical equipment parts, the manufacturer should confirm that the device could not give rise to a potential ignition source. o Please provide evidence / details of any certification - For ATEX rated equipment operating around the fuel tank, it should be Cat 3 (Suitable for use on a Zone 2), Gas Group IIC. o Please provide evidence / details of any certification Please provide an estimate of the Capability’s useful life expectancy, including any and all maintenance services required for the Capability to ensure devices are safely maintained.
Timeline
Publish date
2 years ago
Buyer information
Secretary of State for the Home Department
- Email:
- Detectiontechnologyprocurement@homeoffice.gov.uk
Explore contracts and tenders relating to Secretary of State for the Home Department
Go to buyer profileSource
"Find-a-Tender"To save this opportunity, sign up to Stotles for free.
Save in appTender tracking
Access a feed of government opportunities tailored to you, in one view. Receive email alerts and integrate with your CRM to stay up-to-date.
Proactive prospecting
Get ahead of competitors by reaching out to key decision-makers within buying organisations directly.
360° account briefings
Create in-depth briefings on buyer organisations based on their historical & upcoming procurement activity.
Collaboration tools
Streamline sales workflows with team collaboration and communication features, and integrate with your favourite sales tools.
Explore similar tenders and contracts
Browse open tenders, recent contract awards and upcoming contract expiries that match similar CPV codes.
- Openclosing
US_24346 - Staff Milling Machines (Early Market Engagement)
University of SussexPublished 9 days ago
- Openclosing
HSE RFQ - SUPPORTING HIGH FLOW/PRESSURE EQUIPMENT FOR A PRS FACILITY
Health and Safety Executive27,583 GBPPublished 10 days ago
- Openclosing
Wafer Dicing Saw and Post Wafer Cleaning
University of Southampton205,000 GBPPublished 14 days ago
- Openclosing
Wafer Dicing Saw and Post Wafer Cleaning
University of Southampton205,000 GBPPublished 14 days ago
- Openclosing
UKRI-3968 Fast AWG ( Arbitrary Waveform Generator)
UK Research & Innovation135,000 GBPPublished 17 days ago
Explore other contracts published by Secretary of State for the Home Department
Explore more open tenders, recent contract awards and upcoming contract expiries published by Secretary of State for the Home Department.
- Openclosing
Contract for the provision of Home Office and Asylum Interviews
Secretary of State for the Home Department3,500,000 GBPPublished in 2 months
- Openclosing
ESMCP MCX Dispatcher and related services
Secretary of State for the Home Department10,600,000 GBPPublished 4 months ago
- Closed
HM Cutters - Ships Life Extension Programme
Secretary of State for the Home Department6,000,000 GBPPublished 7 months ago
- Openclosing
CPV - Ships Life Extension Programme
Secretary of State for the Home Department3,000,000 GBPPublished 7 months ago
- Closed
Provision of Medical Services for BF Custody Suites
Secretary of State for the Home DepartmentPublished 2 years ago
- Closed
Contracts for the provision of operational, management, maintenance and related works and services at Campsfield House IRC and Haslar IRC
Secretary of State for the Home Department425,000,000 GBPPublished 2 years ago
- Closed
Mobile Biometric Enrolment (MBE) Devices
Secretary of State for the Home Department450,000 GBPPublished 2 years ago
- Closed
Contract for the provision of Language Analysis Services
Secretary of State for the Home Department500,000 GBPPublished 2 years ago
- Unknown
Contract for the provision of operational, management and maintenance services at Dungavel House Immigration Removal Centre
Secretary of State for the Home DepartmentPublished 2 years ago
Explore more suppliers to Secretary of State for the Home Department
Sign upExplore top buyers for public sector contracts
Discover open tenders, contract awards and upcoming contract expiries of thousands of public sector buyers below. Gain insights into their procurement activity, historical purchasing trends and more.
Explore top sources for public sector contracts
Stotles aggregates public sector contract data from every major procurement data source. We ingest this data and surface the most relevant insights for our users. Explore our list of public sector procurement data sources below.