Design and Installation of Heat Pump and Water Evaporation System for Small-Scale Production Use

Description

The contracting authority is seeking a contractor to design, supply, and install a small-scale heat pump and water evaporation system, to support a niche production process. The system should operate with a degree of automation and be capable of achieving efficient evaporation under specific temperature conditions.The solution must be compact and suitable for installation in a space-constrained environment with limited power supply. The process requires reduced-temperature evaporation, achieved through low-pressure operation, and must be designed to function with minimal ongoing user input.The successful contractor will be expected to:Provide a basic system design tailored to the site and production needsSupply all necessary components and materialsComplete on-site installation and simple operational checksDeliver brief documentation to support handoverDue to the specialist and low-throughput nature of the operation, off-the-shelf or adapted systems may be acceptable. No ongoing maintenance contract is required.NOTE: To register your interest in this notice and obtain any additional information please visit the Sell2Wales Web Site at https://www.sell2wales.gov.wales/Search/Search_Switch.aspx?ID=161791.The buyer has indicated that it will accept electronic responses to this notice via the Postbox facility. A user guide is available at https://www.sell2wales.gov.wales/sitehelp/help_guides.aspx.Suppliers are advised to allow adequate time for uploading documents and to dispatch the electronic response well in advance of the closing time to avoid any last minute problems. This notice has been sent as a region specific notice. If you did not receive an alert about this you are not based in the specific region selected by the buying authority. Questions on why this was sent as a region specific notice should be sent to the buying authority.(WA Ref:161791)