Bootle Kirkby Cable Civils & Installation

Description

Replace 19.429km of 132kV pressurised oil filled cables with 132kV non-pressurised XLPE solid cables Replace 19.429km of underground pilot wire with fibre optic cables Supply and install all ducting for the 132kV non-pressurised XLPE solid cables and fibre optic cables Complete all civils work (excavation, backfilling and reinstatement) associated with the installation Complete a single lane width reinstatement the length of the cable route (section approx. 1.8km) on the East Lancs road (A580) following the cable installation (Section 58 requirement) Scope of this work is for the cable civils only however we are optioning the cable installation costs. Replace existing outdoor sealing end structures at Bootle, Fazakerley and Gillmoss grid substations The existing modern non-pressurised XLPE solid cable sections along the two circuits including the outdoor sealing ends structures will be retained and reused. Drain, cut and cap of redundant oil filled cables and drain all associated oil tanks Lot 1: ScottishPower is part of the Iberdrola Group, which uses Go Supply as its global supplier registration partner. Go Supply is a qualification system under Article 77 of Directive 2014/25/EU, which is operated by Go Supply. The platform provides a system for ScottisPower to select suppliers for invitation to participate in regulatedprocurement procedures. The platform can be accessed at the following URL: https://www.mygosupply.com Go Supply may also be used in the compilation of tender lists below the EU thresholds. ScottishPower may alternatively make separate calls for competition in OJEU for certain individual requirements. Go Supply is based on a coding system for works, supplies and services against which suppliers are registered on the system. The full list of Iberdrola product codes is available at the following URL: https://www.mygosupply.com Vendors not already registered with Go Supply should apply using the contact details at Section I.1) in order to ensure that their details are available to ScottishPower. Vendors already registered on Go Supply must ensure that their registration details are up to date in order to remain visible to ScottishPower. This can be done by visiting http://www.mygosupply.com and logging in using their unique login details.