22-UDE-2022 Fibre laser and edge press for Etterstad Sixth Form College

Description

Etterstad Sixth Form College needs a fibre laser with programming software and 'key in the door' ready set-up as regards installation and training. This also includes courses for users. The machine does not need to have a larger format than 1000mm x 2000mm, but a larger format can be offered if it is deemed to be appropriate. A changing table or similar is not necessary. We can also consider newer second hand machines for fibre laser. In addition to the laser, the college would also like price offers for and edge press, preferably a 2 metre with 60-80 tonnes pressure. The edge press must have cnc control with control of the back, sideway, and height. Lot 1: Etterstad Sixth Form College needs a fibre laser with programming software and 'key in the door' ready set-up as regards installation and training. This also includes courses for users. The machine does not need to have a larger format than 1000mm x 2000mm, but a larger format can be offered if it is deemed to be appropriate. A changing table or similar is not necessary. The college will use the machine for teaching within programming, cnc, and the sheet work trade. We must be able to cut up to 10 mm black and 6 mm stainless steel. The machine ought to be able to cut aluminium with a good result. We can also consider newer second hand machines for fibre laser. In addition to the laser, the college would also like price offers for and edge press, preferably a 2 metre with 60-80 tonnes pressure. The edge press must have cnc control with control of the back, sideway, and height. The edge press must have 88 degrees tool in order to break 1mm - 6mm steel along the full length. The edge press must have an sectioned over tool. Sectioned duvet will also be seen as positive. It must also have full length with over and under tool in 30-35 degrees execution. This must also have the option for sectioning both the over and under tool. The equipment will be placed in premises with 230v electricity output, but in the long term it will be moved to premises with 400v electricity output. 400v is therefore desirable.