Air filters

Description

Several of the AES Corporation subsidiaries, AES Ballylumford, AES Maritza (AES) in Europe is seeking a contractor(s) to supply Filter Elements for an initial 12 months period with the option of extending this for a further 12 months. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements. A Set of pre-filtration socks filtration socks on the air intake of one of the V94.2 gas turbine units. The socks should be manufactured to fit the dimensions of the existing fine filter cartridges, which are not being replaced. It is important that the socks are manufactured from a media that can slide along the stainless steel mesh of the existing fine filter cartridges during installation. A sample will have to be supplied prior to order to confirm correct fit, and ensure that no installation issues are encountered on site. 10.277.194 Filter, HSB-300 (G4)Small pre-filter MTF445324710-F9 10.277.195 Filter, HSB-300(G4) Large pre-filter MTF570445710-F9 Estimated quantity — 580. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements. Air Filters General Purpose Filters: Technical characteristics: — They should be made of pleated high quality industrial filter paper or non-woven (stratified) polyester, acrylic or other synthetic fiber fabric. — They should be covered at both ends with vulcanized pre-shaped plastisol strengthened with metal packing pieces as necessary. — They should be wrapped in protective synthetic or metal mesh. — Performance data: — Particle size filtered: 1 µм to 10 µм — Filtering efficiency: 97 % to 99 % — Permeability: up to 125 m³ per minute at maximum resistance of 0.25 atm. — Maximum operating temperature: 125 °С. Coarse Air Filter for Brush Unit. Technical characteristics: Intended use: Coarse air filter. Type: One-layer pleated filter panel. Frame: Waterproof cardboard, ABS plastic or galvanized steel. Filter element composition: A mixture of cotton and synthetic fibers. Gravimetric efficiency: 90 % Efficiency: according to EN779: 2012: G4 or equivalent. Recommended pressure drop after filter: 250 Pa Operating temperature: 70ºC maximum at continuous operation. Performance data: Dimensions W/H/D, mm: 610/610/48 Efficiency: according to EN779: 2012: G4 or equivalent. Filter area, m²: 1,30 Air flow, m³/h: 3600 Pressure drop, Pa: 55 Weight, kg: 0,7 Volume, m³: 0,02 Fine Air Filter for Brush Unit Technical characteristics: Intended use: Fine air filter Type: A compact filter with aluminium partitions Frame: Galvanized steel Gasket and seal: A fiberglass pad and an oil-resistant seal. Filter element composition: Glass fibbers Face seal: Waterproof neoprene Filter class: according to EN 779: F7 or equivalent. Recommended pressure drop after filter: 250 Pa. Operating temperature/Humidity: 110°C / 100 % RF. Performance data: Dimensions W/H/D, mm: 610/610/150 Efficiency: according to ЕN779:2012: F7 or equivalent. Filter area, m²: 7,8 Air flow, m³/h: 1300 Pressure drop, Pa: 50 Weight, kg: 5,1 Volume, m³: 0,072 Sleeve Filter Ø 125х3000 mm Technical characteristics: — Dusty air volume: 8.000 Nm3/h at 30°C — Filter area: 79 m2 — Bellows, general quality: n°67 — Filtration modules: n°1 — Self-cleaning valves 1” : n°9 — Bellows dimensions: ø125x3000 mm. Filter Bags Ø100mm Technical characteristics: — Nominal diameter: Ø100 mm — Nominal length: 1640 mm — Operating temperature, maximum: 160°C — Material: Polyester — Weight: 475 ÷ 550 г/м2 — Material thickness: 1,5 ÷ 2,2 mm — Material density: 0,28 ÷ 0,37 g/cm3 — Air permeability: 120 ÷ 180 l/dm2/min — Snap ring attachment The filter bags should have a special anti-static treatment as well as impregnation for oleo phobic + hydrophobic treatment. Air Filter Regulator Technical characteristics: — Connection dimension: G1/2 to G1; — Fitted with a pressure gage; — Hand-operated/semi-automatic or automatic condensate discharge; Performance data: — Pressure adjustment range: 0,5 to 12 bar; Cartridge Filter INFA-JETRON AJB 800-980-22 P for Exhaust Air Fan The specified filter elements are from the product catalog of ‘INFASTAUB’ and they can be replaced with equivalent ones. Filter type: P 16 / 1000 Filter element quality: PV — 11 Filter element: 026330 or equivalent. Filters for a Lohenner GmbH & Co Receiver (capacity: 1000 ltr.) The specified filter elements are from the product catalog of ‘Lohenner GmbH & Co’ and they can be replaced with equivalent ones. Air Filter for air supply to a Lohenner GmbH & Co Receiver (capacity: 1000 ltr.) Filter element SMC AF60-F10 or equivalent. Maximum pressure: 1 MPa Filters for a Mastervac TS1800 PN Fixed Vacuum cleaner The specified filter elements are from the product catalog of ‘Lohenner GmbH & Co’ and they can be replaced with equivalent ones. Anti-static filter cartridge for Mastervac TS1800 PN Fixed Vacuum Cleaner Filter element Estimated filter quantity — 2111. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements Fuel Filters General Purpose Filters: Technical characteristics: — They should be made of pleated high quality industrial filter paper, non-woven (stratified) polyester, acrylic or other synthetic fiber fabric or another type of synthetic fibers or multi-layer fine metal woven or non-woven mesh. — They should be covered at both ends with vulcanized pre-shaped plastisol, resistant to fuels and sulfur, strengthened with metal packing pieces as necessary, or made entirely of metal with polymer seals resistant to fuels and sulfur. — They should be wrapped in protective synthetic or metal mesh. Performance data: — Particle size filtered: 5 µм to 25 µм — Filtering efficiency: 93 % to 99 % — Permeability: up to 0,50 м3 per minute at maximum resistance of 0,50 atm. — Maximum operating temperature: 80 °С. Filters for Schmachtl Diesel Burners The specified filter elements are from the product catalogue of ‘Schmachtl’ and they can be replaced with equivalent ones. Filter element BK-1146440 or equivalent. Filter element BK-1143612 or equivalent. Estimated filter quantity — 5. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements Water Filters General Purpose Filters: Technical characteristics: — They should be made of pleated high quality industrial filter paper, non-woven (stratified) polyester, acrylic or other synthetic fiber fabric or another type of synthetic fibers or multi-layer fine metal woven or non-woven mesh. — They should be covered at both ends with vulcanized pre-shaped plastisol, resistant to fuels and sulfur, strengthened with metal packing pieces as necessary, or made entirely of metal with polymer seals resistant to fuels and sulfur. — They should be wrapped in protective synthetic or metal mesh. Performance data: — Particle size filtered: from 25µм to 1000µм. — Filtering efficiency: 93 % до 99 %. — Permeability: up to 50 м3 per minute at maximum resistance of 0,50 atm. — Maximum operating temperature: 80°С. Sampling Filter with Filter Elements Technical characteristics: — Filter element permeability: 7 µm to 40 µm; Performance data: — Maximum pressure: 345 bar (for temperatures of up to 93°C ) — Maximum temperature: 204 °C Other requirements: — Seals: Viton. — Connection dimensions: ¼“, NPT thread. — Head, bowl, internals: of 316 Stainless Steel. Estimated filter quantity — 16. The quantities stated in the tender pack are based on historical information and only provide an indication of our future required Oil Filters General Purpose Filters: Technical characteristics: — They should be made of pleated high quality industrial filter paper, non-woven (stratified) polyester, acrylic or other synthetic fiber fabric or another type of synthetic fibers or multi-layer fine metal woven or non-woven mesh. — They should be covered at both ends with a vulcanized pre-shaped oil-resistant polymer, strengthened with metal packing pieces as necessary, or made entirely of metal with polymer oil-resistant seals. — They should be wrapped in protective synthetic or metal mesh. Performance data: — Particle size filtered: 3µм to 200µм. — Filtering efficiency: 95 % to 99 % — Permeability: up to 5 м3 per minute at maximum resistance of 3 atm. — Operating temperature range: -30°С to 100°С. — Maximum allowable operating pressure: 210 atm. Oil Filters for a Carrier Chiller The specified filter elements are from the product catalogue of ‘Кариер’ and they can be replaced with equivalent ones. Oil Filter with O-ring for a |Carrier Chiller 06NA-660---028—S or equivalent. Oil Filter for a Carrier Chiller 30GX-417---132—EE or equivalent. Filters for a Neumeister Hydraulik GmbH Mobile Hydraulic Unit The specified filter element is from the product catalogue of ‘SF filter’ and it can be replaced with an equivalent one. Filter element HY 10060 or equivalent. Filters for a Voith Coal Mill (Mill Fan) The specified filter element is from the product catalogue of ‘Bosh-Rexroth’ and it can be replaced with an equivalent one. Filter element R928051646 ‘7.004 G25-S00-0-V’ or equivalent. The specified filter element is from the product catalog of ‘Hydac’ and it can be replaced with an equivalent one. Filter element 1291487 0630 ‘DN 025 BN 4 HC’ or equivalent. Filters for a PIV Hydraulic Unit ТСШ The specified filter element is from the product catalogue of ‘Mahle’ and it can be replaced with an equivalent one. Filter element 77687767 ‘852 519 Mic’ or equivalent. The specified filter element is from the product catalogue of ‘Samhydraulic’ and it can be replaced with an equivalent one. Filter element 431.0010.0000 or equivalent. The specified filter element is from the product catalogue of ‘Argo’ and it can be replaced with an equivalent one. Filter element V3-0730-58K1 or equivalent. Filters for a ZVVZ Forced Draft Air Fan The specified filter elements are from the product catalogue of ‘MP filtri’ and they can be replaced with equivalent ones. Filter element 11OP047747 or equivalent. Filter element CU100A25N or equivalent. Filter element MPM025G1M90 or equivalent. Filter element MPM075G1M90 or equivalent. Filters for a ZVVZ ID-Fan The specified filter element is from the product catalogue of ‘Hydac’ and it can be replaced with an equivalent one. Filter element 315738 ‘0080 MG 010 P,10 mikr’ or equivalent. Estimated filter quantity — 112. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements Filters for a HOWDEN Oxidation Air Blower Air Intake Filter Technical characteristics: Intended use: Fine air filter Type: A cassette filter with a pleated filter panel protected against deformation by metal packing pieces. Frame: Galvanized sheet steel Gasket and seal: None Filter element material: Polyester Filter element color: White Filter class: according to EN 779: 2012 — G4 or equivalent; Fire safety class: DIN 53438 — 3(F1) Operating temperature maximum [°C]: 80°C Maximum relative humidity for which filtration performance is guaranteed: 100 % RН. Stickers: Dimensions, air flow direction, filter class. Performance data: Dimensions W/H/D, [mm]: 594 x 594 x 96 Efficiency: according to EN779: 2012: G4 or equivalent. Filter area, [m2]: 2,0 Air flow, [m3/h]: 3400 Initial pressure drop, [Pa]: 50 Maximum pressure drop, [Pa]: 250 Air Filters (Air Vent): The specified filter element is from the product catalogue of ‘MAHLE’ and it can be replaced with an equivalent one. Filter element 852-516-МОL or equivalent. Oil Filters: The specified filter element is from the product catalogue of ‘Hydac’ and it can be replaced with an equivalent one. Filter element without a relief valve 0660R020BN4HC/KB or equivalent. Estimated filter quantity — 199. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements Air Filter Cartridge for an AERZEN GM 25S Blower The specified filter elements are from the product catalogue of ‘Aerzen’ and they can be replaced with equivalent ones. Filter Element 175240000 or equivalent. Filters for a Kaeser BB52C Blower Air filter Filters for a Gardner Denver Blower The specified filter element is from the product catalogue of ‘Universal’ and it can be replaced with an equivalent one. Filter element 81-1209, 12" or equivalent. The specified filter element is from the product catalogue of ‘Viko’ and it can be replaced with an equivalent one. Filter element VKA4324491 or equivalent. Filters for a Vacuum Cleaning System The specified filter elements are from the product catalogue of ‘Hafi’ and they can be replaced with equivalent ones. Filter element 123.273.000 ‘SA19031’ or equivalent. Estimated filter quantitY — 14. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements Filters for vehicles and machinery Filters for a John Deere Diesel Engine The specified filter elements are from the product catalogue of ‘John Deere’ and they can be replaced with equivalent ones. Air Filters for a John Deere RG6081H186377 Diesel Engine Fuel Filter Water Separator for a John Deere RG6081H186377 Engine Filter element: RE508633 or equivalent. Filter element quality: up to 30 microns Precision Fuel Filter for a John Deere RG6081H186377 Engine Filter element AR86745 or equivalent. Oil Filter for a John Deere RG6081H186377 Diesel Engine Filter element: RE57394 or equivalent. Filters for an IVECO F4GE0684E*D650 Diesel Engine The specified filter elements are from the product catalog of ‘IVECO’ and they can be replaced with equivalent ones. Air Filters for IVECO F4GE0684E*D650 Diesel Engines Fuel Filters for IVECO F4GE0684E*D650 Engines Precision Fuel Filter for IVECO F4GE0684E*D650 Diesel Engines Oil Filters for IVECO: F4GE0684E*D650 Diesel Engines Filters for KOMATSU DX85 and KOMATSU WA 470-6 The specified filter elements are from the product catalogue of ‘KOMATSU’ and they can be replaced with equivalent ones. Oil Filter: Filter element 600-211-1340/P559000 or equivalent. Transmission Filter: Filter element 154-49-71990/P557380 or equivalent. Filter element 714-07-28713/SH601128/P502577 or equivalent. Fuel Filter: Filter element 600-319-3440/P553200 or equivalent. Filter element 600-319-3550/P553500 or equivalent. Antifreeze Filter: Filter element 600-411-1151/P554074 or equivalent. Air Filter: Filter element 20Y-60-21410/SA12606 or equivalent. Air Filter Set: Filter element 600-185-5099/P532504 or equivalent. Filter element 600-185-5100/P532503 or equivalent. Hydraulic Filter: Filter element 207-60-71181/P550787 or equivalent. Cab Filter: Filter element 426-07-32441/P606063 or equiv Filters for Bobcat S100 and Bobcat S205 The specified filter elements are from the product catalogue of ‘Бобкат’ and they can be replaced with equivalent ones. Air Filter: Filter element 6690907/AF26168 or equivalent. Filter element 6690908/AF26166 or equivalent. Filter element SA16684/XA2306 or equivalent. Filter element SA16685/XA2378 or equivalent. Hydraulic Filter: Filter element 6661248/P164375 or equivalent. Oil Filter: Filter element P550162 or equivalent. Filter element P551039 or equivalent. Fuel Filter: Filter element 6667352/P551039 or equivalent. Filter element P551042 or equivalent. Fan Filter: Filter element 6692377 or equivalent. Filters for a SuperSucker — Sterling LT9513 Vacuum Truck The specified filter elements are from the product catalog of ‘Ferrex International INC’ and they can be replaced with equivalent ones. Oil Filter: Filter element P550769 or equivalent. Fine Fuel Filter: Filter element P550762 or equivalent. Coarse Fuel Filter: Filter element P551065 or equivalent. Air Filter: Filter element P527682 or equivalent. Hydraulic Filter: Filter element Р550252 or equ Filters for Haulotte MJX 970 The specified filter elements are from the product catalogue of ‘Haulotte’ and they can be replaced with equivalent ones. Fuel Filter: Filter element P553004 or equivalent. Oil Filter: Filter element P553771 or equivalent. Air Filter: Filter element P828889 or equivalent. Filter element P829333 or equivalent. Hydraulic Filter: Filter element SH 74177 or equivalent. Filters for a Kamag Mobile Hydraulic Unit The specified filter element is from the product catalogue of ‘Kamag’ and it can be replaced with an equivalent one. Filter element 357758 or equivalent. The specified filter element is from the product catalogue of ‘Hydac’ and it can be replaced with an equivalent one. Filter element 319500 ‘0250 DN 010 BH4HC’ or equivalent. The specified filter elements are from the product catalog of ‘Mann&Hummel’ and they can be replaced with equivalent o Estimated filter quantity — 197. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements Filters for AMAFILTER GROUP Equipment The specified filter elements are from the product catalogue of ‘AMAFILTER GROUP’ and they can be replaced with equivalent ones. Water Filters: Cartridge Filter EVERBLUE FC2540-2 O-ring 1µ for 40АFK-4Т-4F or equivalent. Cartridge Filter EVERBLUE FC2540-2 O-ring 5µ for 40АFK-4Т-4F or equivalent. Estimated filter quantity — 157. The quantities stated in the tender pack are based on historical information and only provide an indication of our future required. Filters for ATLAS COPCO GA 7-7. E2 FF/270 and ATLAS COPCO GA250 FF Compressors The specified filter elements are from the product catalogue of ‘ATLAS COPCO’ and they can be replaced with equivalent ones. Filter element Р783499 or equivalent. Filter element SH62142 or equivalent. Filter element Р784578 or equivalent. Filter element Р131404 or equivalent. Filter element Р551102 or equivalent. Filter Atlas Copco PD32 for an Atlas Copco CD24 Air Dryer Maximum pressure: 16 bar Maximum temperature: 66°C Filter element 2901 0527 00 or equivalent. Estimated filter quantity — 20. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements Filters for Debris Filters The specified filter element is from the product catalogue of ‘Alfa Laval’ and it can be replaced with an equivalent one. Filter element 9639102505 ‘1,5/2.33,316’ or equivalent. Estimated filter quantity — 1. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements Filters for Alstom Equipment Filters for an Alstom Coal Mill The specified filter elements are from the product catalog of ‘Hydac’ and they can be replaced with equivalent ones. Filter element 1253050 ‘0110 D 010 BH’ or equivalent. Filter element 1262946 ‘0110 R 020 BN’ or equivalent. Filter element 305074 ‘ELF P 5 G 10 W 2.0’ or equivalent. Filter element 309450 ‘0005 L 003 P’ or equivalent. The specified filter element is from the product catalog of ‘Bosh-Rexroth’ and it can be replaced with an equivalent one. Filter R928051650 ‘TLF I 3-40 G25-S00-000-00V00’ or equivalent. Filters for an Alstom Turbine The specified filter elements are from the product catalog of ‘Hydac’ and they can be replaced with equivalent ones. Filter element 1253066 ,0160 D 010 BH4HC, or equivalent. Filter element 312859 ,0850 R 025 W/HC, or equivalent. Filter element 312718 ,0330 R 025 W/HC, or equivalent. The specified filter elements are from the product catalog of ‘UT99 AG’ and they can be replaced with equivalent ones. Filter element 600099 or equivalent. Filter element 600093 or equivalent. The specified filter elements are from the product catalogue of ‘Facet’ and they can be replaced with equivalent ones. Filter element CAA56-5 or equivalent. Filter element ST640FD-5 or equivalent. The specified filter element is from the product catalogue of ‘Mann&Hummel’ and it can be replaced with an equivalent one. Filter element 43 320 67 012 or equivalent. Filters for Alstom Generator Oil Sealing The specified filter element is from the product catalogue of ‘Oerlikon Leybold’ and it can be replaced with an equivalent one. Filter element 18972 ‘FE 16-25’ or equivalent. Estimated filter quantity — 74. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements Filters for a Sulzer Feedwater Pump The specified filter element is from the product catalogue of ‘Internormen’ and it can be replaced with an equivalent one. Filter element 300373 ‘01.NL630.25G.30.E.P’ or equivalent. The specified filter element is from the product catalogue of ‘John Crane’ and it can be replaced with an equivalent one. Filter element 204.00307610 ‘VTR-S-0230-D-UPG-V’ or equivalent. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements Estimated filter quantity — 6. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirement. Filters for Hydac Equipment Filters for a Hydac System for Sealing Water to Main Condensate The specified filter element is from the product catalogue of ‘Hydac’ and it can be replaced with an equivalent one. Filter element 308258 ‘0110 R 050 W’ or equivalent. Filters for a Hydac Hydraulic Unit, Steam Dump to Condenser The specified filter elements are from the product catalogue of ‘Hydac’ and they can be replaced with equivalent ones. Filter element 1262945 ‘0110 R 010 BN’ or equivalent. Filter element 310948 ‘0007 В 003 P’ or equivalent. Filters for а Hydac Hydraulic Unit, Coal Burning Station The specified filter elements are from the product catalogue of ‘Hydac’ and they can be replaced with equivalent ones. Filter element 1262993 ‘0330 R 010 BN4HC’ or equivalent. Filter element 1278798 ‘ ELF P 30 F 3 W 1.0 — 3 microns’ or equivalent. Filters for Hydac Hydraulic Unit Recirculation Water Valves The specified filter element is from the product catalogue of ‘Hydac’ and it can be replaced with an equivalent one. Filter element 1275474 ‘BDE400x2W 0.0’ or equivalent. Filters for a Hydac Mobile Filtration Pump The specified filter elements are from the product catalogue of ‘Hydac’ and they can be replaced with equivalent ones. Filter element 314022 ‘0160 MA 010 BN’ or equivalent. Filter element 315621 ‘0160 MA 005 BN’ or equivalent. Filters for an Oil Filtration Oil Pump The specified filter elements are from the product catalogue of ‘Hydac’ and they can be replaced with equivalent ones. Filter element 0160МА003BN or equivalent. Filter element 0160МА020BN or equivalent. Filter element 0160МА010BN or equivalent. Filter element 0160МА005BN or equivalent. Estimated filter quantity — 70. The quantities stated in the tender pack are based on historical information and only provide an indication of our future requirements Filters for Ball Mills Air Filters (Air Vent) The specified filter element is from the product catalog of ‘MAHLE’ and it can be replaced with an equivalent one. Filter element 852 516 Sm-L (Air Vent) for P10126SM gear unit or equivalent. Oil Filters Technical characteristics: — They should be made of pleated high quality industrial filter paper, non-woven (stratified) polyester, acrylic or other synthetic fiber fabric or another type of synthetic fibers or multi-layer fine metal woven or non-woven mesh. — They should be covered at both ends with a vulcanized pre-shaped oil-resistant polymer, strengthened with metal packing pieces as necessary, or made entirely of metal with polymer oil-resistant seals. — They should be wrapped in protective synthetic or metal mesh Performance data: — Particle size filtered: from 3 µм to 200 µм — Filtering efficiency: 95 % to 99 % — Permeability: up to 5 м3 per minute at maximum resistance of 3 atm. — Operating temperature range: -30°С to 100 °С. — Maximum allowable operating pressure: 210 atm. The specified filter elements are from the product catalogue of ‘MAHLE’ and they can be replaced with equivalent ones. Filter element PI24025DN PS16 or equivalent. Filter element PI74010.DN PS VST16 or equivalent. Oil Filters for INTERNORMEN Hydraulic Units The specified filter element is from the product catalog of ‘Hydac’ and it can be replaced with an equivalent one. Filter element 01NL250.80G.30.E.P without a relief valve or equivalent. Estimated filter quantity — 18.